CargoWayChina · Updated
Cargo to Dushanbe: the 200 kg/m³ density boundary
Calculate China-to-Dushanbe cargo using the Tajikistan road density threshold, fractional volume, finished packing and actual-weight air freight.
Start with the finished shipment
For a Dushanbe quote, prepare package count, actual gross weight and the outside dimensions of each finished carton. Describe the material, intended use, special product features and supplier location in China. Unpacked product dimensions do not represent transport volume. Confirm acceptance and a suitable carriage method with the manager before sending goods to the selected receiving warehouse or committing to supplier dispatch.
Convert dimensions into cubic metres
For dimensions recorded in centimetres, divide each by 100 before multiplying length, width and height. A 60 × 50 × 100 cm carton occupies 0.3 m³. Add the volumes of separate packages and provide total actual weight. Do not round fractional cubic metres up to a whole cubic metre. Keep the original measurements so the calculation can be checked after protective packing is complete.
Tajikistan uses a different road boundary
Density is weight divided by volume. Dushanbe road freight uses volume strictly below 200 kg/m³. At or above 200 kg/m³ it uses actual kilograms at $3.50/kg, without weight discounts. Cubic rates are confirmed separately for the selected road service. Do not substitute the Russia 100 kg/m³ threshold or copy Russian prices into this shipment simply because the same calculator interface is used.
Check both sides of the threshold
At 0.3 m³, 59.7 kg produces 199 kg/m³, so road freight uses volume. At the same volume, 60 kg produces exactly 200 kg/m³ and selects the weight-based branch: 60 × $3.50 = $210 for freight. Packing, insurance, purchasing and additional work are excluded from that amount. If the batch changes, measure the finished packages again instead of assuming the previous weight and volume still apply.
Measure again after crating
Wooden protection adds mass and may increase outside dimensions. Both parts of the density formula can change, so higher density cannot be assumed in advance. Final calculations need updated measurements for the entire packed shipment. Packing, insurance, purchasing and extra inspection work are agreed separately; they should not be assumed included automatically in the transport charge shown by a preliminary calculator result.
Air uses actual kilograms
Under CargoWayChina’s conditions, air freight uses actual kilograms from 1 kg. The 200 kg/m³ boundary concerns road calculations and does not apply to air. Dimensions remain necessary for shipment acceptance and packing review. Confirm the Dushanbe air rate separately: Russia’s $35/kg and Minsk’s $37/kg are not Tajikistan tariffs. A mathematical estimate does not itself establish acceptance of an unusual product or package.
Review the procedure for your product
Tajikistan’s official Trade Portal separates procedures by product and operation. Prepare a product description for the person responsible for clearance and check the relevant procedure. Warehouse photographs and a density calculation do not replace required documents. A previous customer’s shipment checklist should not be assumed valid for your own batch; requirements depend on the goods, receiving party and agreed shipment arrangement.
Record the Dushanbe receiving scope
Give the address or requested collection point, vehicle-access details and unloading needs. Request a separate offer for another final destination. Ask the quote to show weight, volume, density, selected charging unit and included services. Retain approved measurements and available consignment references. If the batch changes, confirm the calculation again instead of applying the previous price to new cartons. Customer-facing managers communicate in Russian.